Top 10 Oxygen Sensor Socket For Nissan – Hand Tools

As an Amazon Associate I earn from qualifying purchases.

1. A ABIGAIL

#ad

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool A7842F

#ad
A ABIGAIL #ad - Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust. This high quality tool can save your time! service 100% satisfaction guarantee, simply contact customer service for troubleshooting help, parts, replacement, If you have any issues with the oxygen sensor socket, or refund.

Packageincludes 2 7/8" 3/8 inch drive vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket. Usage built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars.

Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Our aim is to make you satisfy the parts and the service we provide for you.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7842F

2. A ABIGAIL

#ad

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

#ad
A ABIGAIL #ad - Offset crowfoot socket wrench 1-15/16” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Our aim is to make you satisfy the parts and the service we provide for you. Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. Extra deep broach socket 3-1/8” long, 1-pc 3/8” dr. This high quality tool can save your time! Package1-pc 3/8” dr.

Service100% satisfaction guarantee, parts, replacement, simply contact customer service for troubleshooting help, if you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, or refund. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 1/2” Dr. Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7841F

3. TEKTON

#ad

TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749

#ad
TEKTON #ad - Length: 2. 2 in. Width: 1. 4 in. Height: 1. 2 in. High-contrast, permanent, laser etched size markings are easy-to-read, even in low light. Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires. 22mm socket fits most oxygen sensors. Common 6 point, 7/8 in. Use with any 3/8 inch drive ratchet or breaker bar. High-performance chrome molybdenum steel construction. Removes and installs oxygen sensors on vehicles with computer-controlled engines.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height1.2 Inches
Length2.2 Inches
Weight0.34 Pounds
Width1.4 Inches
Part Number47749
Model47749
WarrantyAlways Guaranteed: [email protected]

4. Apeixoto

#ad

AP1822F 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires

#ad
Apeixoto #ad - Apeixoto offers a full line of oxygen sensor tools including our complete ap1822F Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Function: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage.

Quality:this socket made from premium chrome molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. The sensors live in the harshest of environments and may require some elbow grease to remove, Common 6 point, Use with any 3/8 inch drive ratchet or breaker bar, but this quality tool can save your knuckles and save you time! Features:removes and installs oxygen sensors on vehicles with computer-controlled engines, 7/8 in.

If the part ever fails simply contact us for a replacement for FREE. Lifetime warranty - this air door actuator comes complete with a lifetime warranty. Design: our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. 22mm socket fits most oxygen sensors, Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
BrandApeixoto #ad
ManufacturerApeixoto #ad
Weight0.34 Pounds
Part NumberAP1822F
Model.

5. ZBN

#ad

Infiniti EX35 FX35 FX50 G25 G35 G37 M35 M37 M56, ZBN 234-4380 Air Fuel Ratio O2 Oxygen Sensor Downstream Compatible With Nissan Altima Maxima Murano 350Z 370Z Cube Rogue Sentra

#ad
ZBN #ad - It is mostly not a quality problem. So just not hesitate to contact us to get a solution. B>▲compatible part no. B>▲vehicle fitment is final in the description. Please check your vehicle fitment Year, Make, modelcarefully in the product description followed to avoid any wrong purchase.

B>. Double protective cover, make sure close to original effect. Breathable filter membrane ensure sufficient air for the sensor to achieve superior performance. B>▲ the position of the oxygen sensor in your vehicle and the socket type are very important, please check it carefully with our description and pictures. B>. High quality oem chips and materials, improve fuel efficiency, ensuring accurate signal and longer life.

Insulation preservation Prevents high temperatures, durable, reliable, Long lifetime. Built-in heater to accelerate ignition, vibrations and wire corrosion, reducing harmful emission. B>▲1 year warranty. You will get free and easy replacement or refund if any problem presented to us in the warranty life time. The problem of oxygen sensor may happen because you choose wrong fitment, wrong position or wrong sockets. 234-4380, 2344380, 234 4380.
BrandZBN #ad
Part NumberZBN013OXSN

6. ABN

#ad

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm 7/8in, 27mm, 29mm – All Vehicle O2 Removal and Installation

#ad
ABN #ad - Easy storage: heavy-duty 9” x 2. 25” x 8” inch 22. 9cm x 5. 7cm x 203cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. No more hassle: the abn oxygen 02 sensor socket 7-piece tool kit – 22mm 7/8” inches, oil pressure sending units, vacuum switches, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, oil pressure switches, thermal sensor switches, and installation of hard-to-reach oxygen sensors, 27mm, and brake light switches; Each socket is permanently etched with size marking for your convenience.

Built to last: constructed from chrome-vanadium steel CR-V for extra strength and longevity; Tools have a light coating of oil to protect them from rusting. Matches your car: universal fit for audi, citroen, peugeot, bmw, mercedes, skoda, and volkswagen; sizes include 22mm 7/8”, 27mm, vauxhall/open gm, Renault, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.

Contents: package includes 1 29mm pressure/vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 12pt socket + 1 27mm oil pressure sending unit socket + 1 1-1/16 and 1 inch oil pressure sending unit socket + 1 7/8 inch long oxygen sensor socket wrench + 1 7/8 inch short oxygen sensor socket wrench + 1 carrying case.
BrandABN #ad
ManufacturerABN #ad
Height7.5 Inches
Length9.25 Inches
Weight2.09 Pounds
Width2.5 Inches
Part Number3884

7. Apeixoto

#ad

Apeixoto Oxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” 22mm fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket

#ad
Apeixoto #ad - Warranty - whether it is the quality of the products or your payment, which will always provide customer support. If either actuator fails simply contact us for a replacement.

Quality - constructed from drop forged heat-treated chrome-vanadium steel CR-V for strength and longevity; Black phosphate finish for corrosion resistance. 100% brand new and never used This Genuine Part Is guarantee By Factory Warranty. Size - fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet. Disign features- the size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires.
BrandApeixoto #ad
ManufacturerApeixoto #ad
Part NumberAP1008K
Model13

8. A ABIGAIL

#ad

29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool, 27mm, 7PCS Oxygen Sensor Socket 22mm 7/8 in

#ad
A ABIGAIL #ad - Service100% satisfaction guarantee, parts, simply contact customer service for troubleshooting help, If you have any issues with the oxygen sensor socket, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

High qulitymade of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion. Use built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. Fits all standard oxygen sensors with a 7/8” hexagon nut.

This high quality tool can save your time! Size 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet. Designstandard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7723F

9. ARES

#ad

ARES 70039-3/8-Inch Drive by 7/8-Inch 22mm Offset Oxygen Sensor Socket, Wire Gate Accesses Sensor from Side, Preventing Damage to Wires

#ad
ARES #ad - For added leverage, you can use it with your 3/8-inch breaker bar or ratchet. Design: this socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. The 6-point beveled nose of this 7/8-Inch 22mm socket fits oxygen sensors on a wide variety of vehicles. You are backed by our Performance Assurance Limited Lifetime Warranty.

With your support, we’re proud to help this great organization. If you have any issues with your areS Offset Oxygen Sensor Socket, parts, simply contact customer service for troubleshooting help, replacement, or refund. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time! Reliable | effective | efficient: users trust ares to be quality tools.

Ares offers a full line of oxygen sensor tools including our complete 70318 oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Why you need it: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. Quality: made from premium chrome molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. If you have a pet, you realize they are more than a pet, they are part of the family.
BrandARES #ad
ManufacturerARES #ad
Height1 Inches
Length5.8 Inches
Weight0.35 Pounds
Width2.71 Inches
Part Number70039
Model70039
WarrantyPerformance Assurance Limited Lifetime Warranty

10. OEMTOOLS

#ad

OEMTOOLS 25001 7/8 Inch Oxygen Sensor Deep Socket, 3/8 Inch Drive | Fits O2 sensor in all Domestic & Imported Vehicles w/ Computerized Engines | Cutaway Slot Protects Sensor Wire | Chrome Plated Steel

#ad
OEMTOOLS #ad - Works with most modern vehicles: Removes and installs oxygen sensors on all domestic and imported computerized engine controlled vehicles. Rugged build quality: chrome-vanadium steel holds up to years of strenuous use and just keeps going; chrome-vanadium steel alloy is also rust resistant.

Won’t damage sensor wire: cutaway slot provided in the side for sensor wire clearance for easy removal of o2 sensor, without damage to sensor wire. Full specifications: removes and installs oxygen sensors on all domestic and imported computerized engine controlled vehicles; 7/8" deep socket, fits 3/8 Drive or 1 inch wrench via socket’s hex-bottom, cutaway slot protects sensor wire; chrome-vanadium steel.

O2 sensors are crucial: o2 sensors constantly test the fuel to oxygen ratio in your fuel as it burns; keeping this ratio in a healthy balance is crucial for the long-term health of your engine.
BrandOEMTOOLS #ad
ManufacturerOEM #ad
Height1.2 Inches
Length5.8 Inches
Weight0.5 Pounds
Width1.8 Inches
Part Number25001
Model25001
WarrantyOEMTOOLS Limited Lifetime